TeraFlex Install: JK Rzeppa High-Angle Factory Replacement CV Joint
The TeraFlex JK Rzeppa High-Angle Factory Replacement CV Joint Kit replaces worn or damaged factory Rzeppa CV joint and driveshaft without resorting to an expensive aftermarket U-joint upgrade. The high-angle CV housing reduces boot failure common with 3” or more lift heights.
The included low-friction grease is engineered specifically for the high RPM needs of the JK Rzeppa CV joint and features high-viscosity surface bonding characteristics necessary to properly adhere the grease to all moving surfaces.
• JK Wrangler (2-door) • JKU Wrangler Unlimited (4-door)
• CV joint assembly • High-angle CV housing cap and boot • Bolt flanges • Socket head bolts • 6mm Allen wrench • Low-friction CV grease
• Proper grease packing of the joint is essential for joint longevity. • Grease must be packed thoroughly & liberally to the entire CV assembly. Be generous & use all grease provided. Improperly packing the bearings w/out sufficient grease will result in bearing failure. For complete step-by-step procedure please watch the instructional video linked below.
INSTALL TIME: 1 Hour
via TeraFlexSuspensions https://www.youtube.com/channel/UChC22VXvlD0W0W–qtUaPtQ
April 17, 2018 at 05:23PM